part list specifies a 4-8H @200ma, 100 ohms. Not able to find.A replacement choke that is used on fender twins is a Hammond 4H @90ma Model # 194B. Will this work for 100watt dumble? if not were can you get the choke on your material list. Thanks Bill D.
top of page
bottom of page
The Hammond 194B will work just fine (I use these all the time). The reason it will work is that the current that passes through it (the 90mA part of the spec) does NOT supply the power tubes. The preamp tubes draw very small amounts of current.
If you're in the US, try Hawkusa.com. -- best prices, great shipping.